Plain Bath Foam

---

Plain Bath Foam supplied in a 100ml Bottle.

A clear and effective foam bath gel developed to solubilise and disperse essential oils.

The primary surfactant is laureth sulfate, the grade used is highly refined and has a low skin irritating potential, this potential is reduced further with the combined use of the foam enhancer and strengthener and the amphoteric betaine. Sodium chloride is used to adjust the viscosity of this product while the citric acid is used to adjust the PH.

Benefits: An effective foaming bath base capable of holding a high concentration of essential oils for high class foaming bath which disperse essential oils and are highly effective in allowing them to be absorbed into the skin for bathing experiences which maximise the effects of essential oils.

Directions for Use: Apply under running hot water for a foaming bath experience.

Directions for Blending: We recommend keeping your blend 2% or under (approximately 40 drops per 100ml) if when you add your oils you are making the base go significantly cloudy, you are putting too much in. The scent will enhance over a couple of days as products always mature after adding oils.

Shelf Life: 12 - 18 Months - Shelf life will depend upon the ingredients you add. Adding oils which quickly go rancid can reduce the life expectancy of the product, whereas adding oils with natural long life can extend the product life further by enhancing the natural preservative system.

Ingredients: Aqua, Sodium lauryl sulphate, Cocamidopropyl betaine, Sodium chloride, Cocamide DEA, Potassium sorbate, Sodium benzoate, Citric acid

pH Value: 7.1

---

Plain Bath Foam supplied in a 250ml Bottle with a lotion pump.

A clear and effective foam bath gel developed to solubilise and disperse essential oils.

The primary surfactant is laureth sulfate, the grade used is highly refined and has a low skin irritating potential, this potential is reduced further with the combined use of the foam enhancer and strengthener and the amphoteric betaine. Sodium chloride is used to adjust the viscosity of this product while the citric acid is used to adjust the PH.

Benefits: An effective foaming bath base capable of holding a high concentration of essential oils for high class foaming bath which disperse essential oils and are highly effective in allowing them to be absorbed into the skin for bathing experiences which maximise the effects of essential oils.

Directions for Use: Apply under running hot water for a foaming bath experience.

Directions for Blending: We recommend keeping your blend 2% or under (approximately 40 drops per 100ml) if when you add your oils you are making the base go significantly cloudy, you are putting too much in. The scent will enhance over a couple of days as products always mature after adding oils.

Shelf Life: 12 - 18 Months - Shelf life will depend upon the ingredients you add. Adding oils which quickly go rancid can reduce the life expectancy of the product, whereas adding oils with natural long life can extend the product life further by enhancing the natural preservative system.

Ingredients: Aqua, Sodium lauryl sulphate, Cocamidopropyl betaine, Sodium chloride, Cocamide DEA, Potassium sorbate, Sodium benzoate, Citric acid

pH Value: 7.1

---

Plain Bath Foam supplied in a 500ml Bottle with a lotion pump.

A clear and effective foam bath gel developed to solubilise and disperse essential oils.

The primary surfactant is laureth sulfate, the grade used is highly refined and has a low skin irritating potential, this potential is reduced further with the combined use of the foam enhancer and strengthener and the amphoteric betaine. Sodium chloride is used to adjust the viscosity of this product while the citric acid is used to adjust the PH.

Benefits: An effective foaming bath base capable of holding a high concentration of essential oils for high class foaming bath which disperse essential oils and are highly effective in allowing them to be absorbed into the skin for bathing experiences which maximise the effects of essential oils.

Directions for Use: Apply under running hot water for a foaming bath experience.

Directions for Blending: We recommend keeping your blend 2% or under (approximately 40 drops per 100ml) if when you add your oils you are making the base go significantly cloudy, you are putting too much in. The scent will enhance over a couple of days as products always mature after adding oils.

Shelf Life: 12 - 18 Months - Shelf life will depend upon the ingredients you add. Adding oils which quickly go rancid can reduce the life expectancy of the product, whereas adding oils with natural long life can extend the product life further by enhancing the natural preservative system.

Ingredients: Aqua, Sodium lauryl sulphate, Cocamidopropyl betaine, Sodium chloride, Cocamide DEA, Potassium sorbate, Sodium benzoate, Citric acid

pH Value: 7.1

---

Plain Bath Foam supplied in a 1000ml (1 Litre) Bottle with a lotion pump.

A clear and effective foam bath gel developed to solubilise and disperse essential oils.

The primary surfactant is laureth sulfate, the grade used is highly refined and has a low skin irritating potential, this potential is reduced further with the combined use of the foam enhancer and strengthener and the amphoteric betaine. Sodium chloride is used to adjust the viscosity of this product while the citric acid is used to adjust the PH.

Benefits: An effective foaming bath base capable of holding a high concentration of essential oils for high class foaming bath which disperse essential oils and are highly effective in allowing them to be absorbed into the skin for bathing experiences which maximise the effects of essential oils.

Directions for Use: Apply under running hot water for a foaming bath experience.

Directions for Blending: We recommend keeping your blend 2% or under (approximately 40 drops per 100ml) if when you add your oils you are making the base go significantly cloudy, you are putting too much in. The scent will enhance over a couple of days as products always mature after adding oils.

Shelf Life: 12 - 18 Months - Shelf life will depend upon the ingredients you add. Adding oils which quickly go rancid can reduce the life expectancy of the product, whereas adding oils with natural long life can extend the product life further by enhancing the natural preservative system.

Ingredients: Aqua, Sodium lauryl sulphate, Cocamidopropyl betaine, Sodium chloride, Cocamide DEA, Potassium sorbate, Sodium benzoate, Citric acid

pH Value: 7.1